Low-cost membrane cleans up light and heavy oils in a single step

Researchers at the University of British Columbia have developed a low-cost membrane that effectively separates oil and water on demand—potentially paving the way for faster cleanups of oil spills and improved treatment of industrial wastewater in the future.

The consists of a treated copper that can be switched from oil-removal to -removal mode simply by applying a few seconds' worth of voltage from a regular alkaline battery. In the oil-removal mode, heavy oil passes through the mesh while water is retained; in water-removal mode, the mesh allows water to pass through while retaining light oil. This enables users to achieve almost complete separation of both light and heavy oils from water using a single membrane.

"This technology offers an effective and eco-friendly way to reduce the negative impacts of oily water and wastewater, which are being produced by domestic, municipal and industrial processes every day," says Chun Haow (Bryan) Kung, a chemical engineering master's student at UBC who led the study. "Other oil-water separation methods, such as those that rely on skimming, combustion and solvents, are either too expensive, too cumbersome, or inefficient."

While there are other membrane treatments that can switch from oil removal to water removal, they often rely on toxic, unstable chemical coatings that take time to activate. They also tend to produce relatively impure oil and water that need to be processed further, noted Kung.

"Our membrane is free of additives and is capable of achieving at least 98 per cent purity for the separated oil and water," said Kung. "It needs a single electrical charge to switch operations, and requires no special equipment or conditions."

Kung and his colleagues prepared the membrane by immersing a simple copper mesh in an electrolyte solution and applying two small voltages for a total of two minutes. The process changes the surface structure of the mesh and gives it the ability to switch back and forth from attracting water and repelling oil to attracting oil and repelling water.

To test the mesh's robustness, the team also put it through 30 consecutive separation cycles, using mixtures containing both light and heavy oils.

"Oil-contaminated water continues to be a major problem around the world, with an estimated two million tonnes of oil being discharged into bodies of water each year," says the study's senior author, Walter Mérida, a mechanical engineering professor at UBC and the director of the university's clean energy research centre. "Our hope is that this membrane ultimately leads to a better way to treat our water and protect our environment."

The paper was recently published in Applied Surface Science.

More information: Chun Haow Kung et al, On-demand oil-water separation via low-voltage wettability switching of core-shell structures on copper substrates, Applied Surface Science (2018). DOI: 10.1016/j.apsusc.2018.02.238

Citation: Low-cost membrane cleans up light and heavy oils in a single step (2018, May 25) retrieved 28 March 2024 from https://phys.org/news/2018-05-low-cost-membrane-heavy-oils.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Membrane can better treat wastewater, recover valuable resources

7 shares

Feedback to editors